|
Post by one92rs on May 23, 2012 21:18:27 GMT -6
found a parking brake cable sticking a tiny bit. put in a new bushing in the tailshaft housing on the tranny. gotta new torque arm bushing coming tomorrow. gonna reseal the tailhousing also and the speed sensor. painted the torque arm today also after steam cleaning it at work. scuffed shoes in rear and pads in front. this weekend 1. lube all shock bushings 2. lube all sway bar bushings 3. check coil springs bushings 4. put it all back together and drive it. if all noises gone? then it will be time to detail her.
|
|
|
Post by Mancha87 on May 24, 2012 19:39:31 GMT -6
Good stuff!
|
|
|
Post by one92rs on May 25, 2012 16:17:45 GMT -6
she is on the ground. bushing installed. tailhousing redone and back on. park brake cables fixed. got some more work to do to her tomorrow and then to do a drive around. will keep everyone updated.
|
|
|
Post by one92rs on May 26, 2012 14:22:11 GMT -6
put her back in the air today due to a squeak still being there. was ready to drop the transmission. removed the dust cover and WALLA!!!!! FOUND IT!!!!! 1 converter bolt missing and another loose. put in new ones. reinstalled cover and went for a drive.
NO MORE SQUEAK!!!!!!!!!!!!
let the detailing begin. ;D ;D ;D
|
|
|
Post by one92rs on Sept 27, 2012 16:09:52 GMT -6
had a rubbing sound come in about a week ago. was a biatch to locate. found that when 2 people were in the car it would sit low enough to make the noise. after searching everything i could think of i jacked her off the ground to also find a rattle. fixed the rattle with a loose exhaust bracket. was laying underneath ( she was really high) and found it. park brake cable had come out of their holders and would rub on the driveshaft but only 2 people in the car.
|
|