|
Post by one92rs on May 13, 2012 17:22:09 GMT -6
all the sudden i have picked up a squeaking noise while driving. when i hit the brakes it disappears. i removed the front wheels, brakes, and rotors. cleaned, repacked, and reinstalled bearings and rotors. no change on the galveston trip today. going to pull the rear down this week and see what i find.
|
|
|
Post by Axehole on May 13, 2012 17:25:28 GMT -6
You have a small mouse nesting under your gas pedal. Every time you step on the gas you squish him and he starts squeaking. When you let off the gas and hit the brakes he stops. It's a common problem with third gens
|
|
|
Post by one92rs on May 13, 2012 17:29:32 GMT -6
now thats funny right there i dont care who you are.
|
|
|
Post by 83camaroz28 on May 13, 2012 20:46:56 GMT -6
Haha. Thats is pretty ***** funny!
|
|
|
Post by one92rs on May 17, 2012 18:45:15 GMT -6
axle bearings are gone. car is down. hopefully i can get her back together and that is all it is. also ujoints are clicking as well. damnit.
|
|
|
Post by one92rs on May 19, 2012 17:16:04 GMT -6
CAR IS STILL DOWN!!!!! well pulled the rear axles out-no biggie-. getting the old bearings and seals out ( biatch ). put the first repair bearing in and it didnt seat all the way flush. pulled it back out. then after destroying it found it was not suppose to seat all the way flush. ok. cleaned the axles down farther so the new seal would have a good place to ride. then the spiders fell out while doing all this. getting them lined back up to put the locking pin back in is a whole nother story. got all this done and the squeak was gone. BUT!!!!!!!! now i have found that there is a slight grinding noise in the tail housing in the transmission. next project is to get the car off the ground and take the tailhousing all apart. that is a going to be a project in itself. so for now she is still down.
|
|
|
Post by Mancha87 on May 19, 2012 17:32:07 GMT -6
Mother F ERRRRRRRRRRRRRR
Will you still be able to make the round-up!?
|
|
|
Post by one92rs on May 19, 2012 17:58:56 GMT -6
im hoping so.
|
|
|
Post by one92rs on May 20, 2012 9:45:29 GMT -6
been up since 6 this morning. SHE IS ON THE ROAD. removed the driveshaft and ground the yoke down some. ( ls1 ) driveshaft. put her back in and all seems to be well. keepin my fingers crossed. ;D
|
|
|
Post by LM91Rs on May 20, 2012 11:01:12 GMT -6
Yesss ;D
|
|
|
Post by one92rs on May 20, 2012 14:10:37 GMT -6
the good luck is no longer in play. she is up on jackstands until i can locate the noise that i believe is in the tranny. got the tailhousing off and it is still making a noise. so as of now she is down again. if it is the tranny that needs to be fixed i am thinking it will stay down for a while.
|
|
|
Post by LM91Rs on May 20, 2012 14:23:05 GMT -6
SON OF A *****
|
|
|
Post by one92rs on May 20, 2012 15:09:57 GMT -6
im here to tell you. SHE IS DOWN NOW. transmission front sprag bearings are out. if i can manage it i will make it. but as of right now she is out of the round up.
|
|
|
Post by LM91Rs on May 20, 2012 15:48:40 GMT -6
That sucks man, I feel your pain.
|
|
|
Post by Axehole on May 20, 2012 21:09:56 GMT -6
NOOOOOOO! You can fix it!
|
|