|
Post by Axehole on May 16, 2012 21:51:42 GMT -6
I don't feel like messing with them anymore. still need a little fitting and some way to bolt them to the car and paint. I just want the "blisters" that come on the 89 and newer z 28's.
|
|
|
Post by LM91Rs on May 16, 2012 21:56:19 GMT -6
|
|
|
Post by Axehole on May 16, 2012 22:08:46 GMT -6
yeah those. I probably won't have anything on my car at the meet lol
|
|
|
Post by zones89rs on May 17, 2012 14:03:02 GMT -6
Man, I rolled around hoodless when my L88 hood flew off the car, was pretty funny, had some chrome on the old 383s so it worked. Didn't have anything to hide.
|
|
|
Post by Axehole on May 17, 2012 20:28:32 GMT -6
well I'll have a hood just without blisters lol
|
|
|
Post by NemeSS on May 17, 2012 23:00:31 GMT -6
just say they flew off becuz racecar
|
|
|
Post by Axehole on May 20, 2012 12:25:44 GMT -6
Well I drive it to work friday and have been cruising it around all weekend! Running good except when its warmed up and driving when you let off the gas all the way the throttle surges about 5 times before idling normal. gotta do some research on that.
|
|
|
Post by Mancha87 on May 21, 2012 16:34:29 GMT -6
Get a chance to check this out yet?
|
|
|
Post by one92rs on May 21, 2012 16:35:37 GMT -6
what??
|
|
|
Post by Mancha87 on May 21, 2012 17:23:55 GMT -6
Well I drive it to work friday and have been cruising it around all weekend! Running good except when its warmed up and driving when you let off the gas all the way the throttle surges about 5 times before idling normal. gotta do some research on that.
|
|
|
Post by Axehole on May 21, 2012 17:32:31 GMT -6
Egr valve not operating properly or some kind of vacuum leak
|
|
|
Post by one92rs on May 21, 2012 18:13:26 GMT -6
when it is running push the inside of the egr valve in and see if the engine dies.
|
|
|
Post by Axehole on May 21, 2012 19:39:02 GMT -6
My egr valve is different than yours I can't reach it
|
|
|
Post by Axehole on May 23, 2012 11:57:04 GMT -6
Well I think lance and I have something in common...transmission troubles. Went to leave for work today and it had no pulling power and wouldn't shift out of second. Not sure what is going on ill have to lok at it after work
|
|
|
Post by one92rs on May 23, 2012 15:31:17 GMT -6
check your detent cable.
|
|